ležajni bloki, ki ne korozijo, za vretenodryspin® lasersko sintranje ležajne bloke Za velikosti navoja 6 – 24 mm so na voljo praktični podporni bloki vretena. Možnosti vgradnje z drsnimi ležaji ali krogličnimi ležaji (BB) z višjo dinamiko. Vsi podporni bloki vretena, kot ustrezni obroči z vreteno, so dobavljivi iz trdo anodiziranega aluminija.
► Brez mazanja in vzdrževanja
► Ohišje za podporo vretena
► Lurke za montažo za vašo aplikacijo
► Pripravljen za povezavo dodatkov, kot so prikazi položaja in ročne sponke
► Ležajni bloki za lasersko sintranje na voljo za vretene od premera 6 mm
► Verzije za TR in DS navoj
FL: fiksni ležaji z anodiziranim vpenjalnim obročem z desnim navojem in drsnimi ležaji iglidur® brez mazanja
LL: plavajoči ležaji z drsnimi ležaji iglidur® brez mazanja
LH: možnost levi navoj, samo TR10, TR2, TR10 in TR3
_____________________________________________________________________________________
Why are there different versions? The bearing arrangement has to fulfil the principle of clarity. Furthermore, the bearing must ensure the defined control of the force flow. If it does, the bearing is considered statically determined. There are various bearing options, such as the
fixed floating bearing and the
double-sided floating bearing. Fixed floating bearing:the fixed bearing clearly positions the shaft in an axial direction. The fixed bearing must therefore absorb both radial and axial forces and guide them into the surrounding structure. This can basically be fulfilled by a single bearing. The floating bearing corrects parallelism errors minimally and offers thermal expansion capability, which means that the cable is not stressed.
Advantages of fixed floating bearing
► No axial clearance
► Non-critical shaft expansion (due to such factors as temperature)
► Suitable for changing axial loads
► Clarity of forces applied
Double-sided floating bearing:in a double-sided floating bearing, the lead screw is not clearly fixed in the axial direction. This means that without stressing the bearing, mechanical or thermal differences in length can be absorbed, but the lead screw is not protected against drifting. This has to be considered in particular when dealing with positioning applications.
Advantages of double-sided floating bearings:
► Cost-effective
► Low design cost
► Non-critical shaft expansion (due to such factors such factors as temperature) in the area of clearance
Disadvantages:
► Not clearly fixed in the axial direction
► Not suited to changing axial loads
► Only if axial clearance does not impair function
_________________________________________________________________________________________________________
Versions
Fixed bearing version (FL)Depending on thread dimensions, this version has the clamping ring clamped into the lead screw itself or to the lead screw's outer diameter. For high helix lead screws, it is always the outer diameter that it is clamped to.
► Note:
you can also choose a bearing block for your application that uses the measurement d1 for clamping onto the turned machined end.
Floating bearing (FL):depending on the lead screw's dimensions, a machined end must be turned to the value d1. You can see below which dimensions this applies to. The floating bearing block merely supports the lead screw. This type does not prevent the lead screw from drifting.
Ball bearing type (BB):this bearing block should always be used in case of highly dynamic applications, e.g. when a motor is involved
__________________________________________________________________________________________________
Oblika konice za obdelavo konca vretena: | Številka dela | d1 mm | | | | | | | | | | | | | | |
| SLS-16-LL | 12 |
| SLS-16-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-20-LL | 12 |
| SLS-24-LL | 14 |
| SLS-S16-LL | 12 |
| SLS-S18-LL | 12 |
| SLS-S20-LL | 12 |
► Opozorilo za največjo nosilnost: lahko preseže največjo obremenitev matice vretena.
