Crossbar and interior separation for the E6.1 6 and E6 series

New crossbar

Stronger and even less abrasion for greater cleanroom suitability
A new tribo-material makes it possible: the crossbars made from two-component injection moulding further reduce the abrasion of the E6 and E6.1 cleanroom chain.
The request came from a major customer in the semiconductor industry. Can the abrasion of the E6 cleanroom chain be reduced even further? The answer: yes - with a new, abrasion-optimised guide bar. And with a clever "division of labour" between the inner and outer materials.

Tech up

Newly developed, cleanroom-compatible tribo-plastic
igulen CR1 significantly reduces abrasion of the cables
Easy to install and retrofit
High ease of installation

Cost down

Longer cable service life due to reduced jacket abrasion
Quick to retrofit, an upgrade for greater cleanroom suitability
Reduced maintenance effort

Proof

igus igulen CR1 material generates 89% less abrasion
than the igus standard material*

Sustainability

Saving resources through a long service life
Have your energy or drag chain recycled at the end of its life cycle in the igus Chainge recycling programme. No matter which manufacturer. You will receive a voucher for this: Chainge recycling programme

*Measured and averaged on five different friction partners:

CF340.250.01 2) CF270.UL.350.01.D 3) CF886.350.01 4) CAPE.A.10.0 5) CAPU.A10.0

Product range:

Part No.	Suitable for:	Width
2105.BBB.CR1	Crossbar suitable for the E6.29/E61.29/E6.35/E61.35 ranges	030 - 140mm
225.BBB.CR1	Crossbar suitable for series E6.40 / E61.40 / E6.52 / E61.52	040 - 300mm

Available upon request

New interior separation

Further minimising abrasion
A new cleanroom material is used in the new interior separation of the E6 cleanroom chain. Sometimes it's the details that bring decisive improvements. A new interior separation further increases the abrasion resistance of the E6 and E6.1 cleanroom energy chain

Product range:

Part No.	Suitable for	Width BBB
E6.29.1.CR1	Separator suitable for the E6.29/E61.29 ranges	-
E6.35.1.CR1	Separator suitable for series E6.29 / E61.35	-
E6.40.1.CR1	Separator suitable for series E6.29 / E61.40	-
E6.52.1.CR1	Separator suitable for series E6.29 / E61.52	-
2300.BBB.CR1	Shelf suitable for all E6.20-52 ranges	030 - 300mm

Free white paper:

Energy supply for the cleanroom

In this white paper, you will learn how you can use the right energy supply in the cleanroom to

Increase system efficiency
Generate higher yields from production lines
Use energy supply more sustainably

Download now to find out more

Suitable products

E6 series

6-piece energy chains. Robust, quiet, low-vibration, cleanroom-compatible and ISO Class 1.

To the product

E6.1 series

The new generation of smooth-running and cleanroom-compatible energy chains. Extremely low vibration, weight saving of approx. 30% compared to system E6 and ISO Class 1

To the product

NEW: Series C6

Optimised design without measurable abrasion. For ISO Cleanroom Class 1 applications. High stability and smooth running due to moulded silencer profile.

To the product

More information

Other energy chains
Other abrasion-resistant energy chains for cleanroom applications in accordance with Class 1 of EN ISO 14644-1.

To cleanroom energy chains

Further cleanroom products
Discover more valuable information about the cleanroom and other cleanroom products.

To cleanrooms

Cleanroom test laboratory
In-house cleanroom laboratory in the igus technical centre in accordance with IPA certification. Here, customised energy supply applications can be tested for their cleanroom compatibility at short notice.

To the cleanroom test laboratory

Consulting

I look forward to answering your questions

Hennlich, d.o.o.+386 4 532 06 15 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr