igusigus-icon-cart(0)

Gears & Racks online shop

In our gear shop you have the possibility to buy different plastic gears.
The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
Do you have questions about our gears or would you like technical support? We will be happy to advise you without obligation. Contact us here.

Number of products 21

iguform S270 gears, mm

iguform S270 gears, mm
  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise


8 different modules available. Choose from over 300 dimensions.


For information on tolerances, please refer to the product description.

EUR 1.62/Pc.Cost-effective price break available onlineEUR 0.91/Pc. 25 Pc.

317 variant(s), of which:

igus-icon-lieferzeit
313 ready for shipping in 48 hours

igutek P360 gears, mm

igutek P360 gears, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

8 different modules available. Choose from over 300 dimensions.

Matching gear racks available here

For information on tolerances, please refer to the product description.
EUR 1.87/Pc.Cost-effective price break available onlineEUR 1.12/Pc. 25 Pc.

316 variant(s), of which:

igus-icon-lieferzeit
312 ready for shipping in 48 hours

iguform S270 gear racks, mm

New
iguform S270 gear racks, mm
  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise
EUR 4.30/Pc.Cost-effective price break available onlineEUR 3.14/Pc. 25 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
7 ready for shipping in 48 hours

xirodur® B180, gear, mm

xirodur® B180, gear, mm
Tech up
  • Low coefficient of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening

Cost down
  • Cost-effective due to injection moulding
  • Maintenance-free with the use of iglidur® materials
  • Long service life

Proof
  • iglidur® gears are already being used successfully in our gearboxes

Sustainability
  • Environmentally friendly as no additional lubricants needed
  • Good coefficient of wear and therefore a long service life
  • igus supports the circular economy of plastics and is investing in chemical recycling. Learn more about this topic at: www.igus.eu/plastic2oil 
EUR 8.07/Pc.Cost-effective price break available onlineEUR 6.68/Pc. 25 Pc.

9 variant(s), of which:

igus-icon-lieferzeit-dot
6 ready for shipping in 24-48 hours

igutek P360 gear racks, mm

New
igutek P360 gear racks, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads
EUR 4.97/Pc.Cost-effective price break available onlineEUR 3.70/Pc. 25 Pc.

9 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

iglidur® A500 gear, mm

iglidur® A500 gear, mm
  • The endurance runner at higher temperatures in the food sector
  • Compliant with Regulation (EU) No. 10/2011
  • FDA compliant
  • Temperature resistant from -100°C to +250°C

iglidur® F, gear, mm

iglidur® F, gear, mm
  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs
Upon request

9 variant(s), of which:

igus-icon-lieferzeit
9 Delivery time on request

iguform S270 bevel gears - ratio 1:1

iguform S270 bevel gears - ratio 1:1
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
EUR 1.87/Pc.Cost-effective price break available onlineEUR 1.12/Pc. 25 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:1

igutek P360 bevel gears - ratio 1:1
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
EUR 2.04/Pc.Cost-effective price break available onlineEUR 1.26/Pc. 25 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

iguform S270 bevel gears - ratio 1:1,5

iguform S270 bevel gears - ratio 1:1,5
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
EUR 6.23/Pc.Cost-effective price break available onlineEUR 4.75/Pc. 25 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:1,5

igutek P360 bevel gears - ratio 1:1,5
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
EUR 7.32/Pc.Cost-effective price break available onlineEUR 5.66/Pc. 25 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

iguform S270 bevel gears - ratio 1:2

iguform S270 bevel gears - ratio 1:2
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
EUR 4.39/Pc.Cost-effective price break available onlineEUR 3.21/Pc. 25 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:2

igutek P360 bevel gears - ratio 1:2
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
EUR 5.22/Pc.Cost-effective price break available onlineEUR 3.91/Pc. 25 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 ready for shipping in 48 hours

iguform S270 bevel gears - ratio 1:3

iguform S270 bevel gears - ratio 1:3
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
EUR 3.46/Pc.Cost-effective price break available onlineEUR 2.44/Pc. 25 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:3

igutek P360 bevel gears - ratio 1:3
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
EUR 4.05/Pc.Cost-effective price break available onlineEUR 2.93/Pc. 25 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 ready for shipping in 48 hours

iguform S270 bevel gears - ratio 1:4

iguform S270 bevel gears - ratio 1:4
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
EUR 2.88/Pc.Cost-effective price break available onlineEUR 1.95/Pc. 25 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
6 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:4

igutek P360 bevel gears - ratio 1:4
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
EUR 3.46/Pc.Cost-effective price break available onlineEUR 2.44/Pc. 25 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
5 ready for shipping in 48 hours

iguform S270 bevel gears - ratio 1:5

iguform S270 bevel gears - ratio 1:5
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
EUR 2.88/Pc.Cost-effective price break available onlineEUR 1.95/Pc. 25 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

igutek P360 bevel gears - ratio 1:5

igutek P360 bevel gears - ratio 1:5
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
EUR 3.46/Pc.Cost-effective price break available onlineEUR 2.44/Pc. 25 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 ready for shipping in 48 hours

igutek P360 angular gears, mm

igutek P360 angular gears, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

Shopping at igus®