Inspection and test technology

Overview

Optical inspection by cameras or sensor detection is used in filling systems to check the containers passing through and divert them if necessary. Camera, sensor and lighting technology must be flexibly adjustable for this purpose. This is where our linear bearing technology comes into its own, ensuring the smooth and continuous fine adjustment of expensive technology without the use of lubricants.

Products used and application examples

Using the example of Indspect GmbH's testing devices, the testing technology in bottling plants is discussed in more detail. Our products such as linear bearings or spindle linear tables are primarily used here for the precise adjustment of sensors, cameras and lighting technology.

**
Overview of fields of application**

Labelling and bottle inspection

Adjustment of cameras, sensors and lighting systems

Wipotec inspection system with control screen and conveyor for product inspection.

More about this application

Bottle inspection with a sensor on a rotary table.

Labelling and bottle inspection

drylin® SLW or SHT spindle linear tables allow smooth and fine adjustment when adjusting the height of cameras, sensors or lighting.

Camera adjustment with igus linear guide next to a rotating bottle carousel.

Adjustment of the camera box

drylin® SLW-2080 linear stages enable the completely lubrication- and maintenance-free XZ adjustment of inspection cameras.

Customer application examples

Format adjustment in inspection systems

Krones inspection technology with Linatronic 735 and Checkmat 731 Compact for camera and format adjustment.

Inspection systems from Krones such as the Linatronic 735 rely on our plain bearings, e-chain®, gearbox solutions and linear axis for format adjustment.

Go to user report