Change Language :

Adapter for easy connection of the energy chain

igus cable chain and connection module with connectors, awarded the German Design Award 2021.

Standard version: black (other colours available on request)

Module Connect adapter - saves installation time
The new Module Connect adapter is specially designed to make the interface concept, Module Connectand to connect the energy chain with its cables even more easily. The pre-assembled e-chain® is a coherent system and can be installed directly.

The e-chain® and the Module Connect are standardised. Depending on the chain series, chain width and number of Module Connect connectors, a customised chain adapter is produced using 3D printing. (The possibility of a plastic injection-moulded part can also be tested.) The adapter is simply attached to the Module Connect and can then be attached to the chain using a snap-in mechanism.

This means that the entire assembly of a readychain® standard including Module Connect is a coherent system, i.e. the connector assignment and cable lengths are clearly defined.

Make a request now

Tech up

  • Fitted without additional sheet metal parts
  • Flexible: simple clip fastening for wall and floor
  • Safe: integrated strain relief and seal
  • Suitable: Configure interface by combining individual housings into one connector

Cost down

  • 80% assembly time save
  • Ready-to-install assemblies optimise handling
  • For service: unplug it, plug it back in, done

Proof

Sustainability

  • Existing igus energy supply systems can be supplemented
  • Adapters from the 3D printing process are suitable for chain width and chain height

Quick assembly

We have developed the Module Connect adapter for this purpose

Wherever fast response times are required in the event of a fault, for example, the Module Connect adapter can ensure that the energy supply is connected quickly, thus avoiding long downtimes.

For example, in an automatic parking system where the customer drops off his car for parking. The car is weighed and measured by the system and then automatically moved to a suitable parking position.
If a cable break in the e-chain® or a leak in the pneumatic hose brings the system to a standstill, any service employee should be able to disconnect the defective energy chain and connect a new, pre-assembled energy chain. The adapter makes this quick and easy - without the need for basic electronic knowledge.

However, the Module Connect adapter is not only used in automatic parking systems and ensures fast maintenance, but also in production or pharmacy systems and wherever energy supplies need to be plugged in.

Automated parking system with several cars in a circular multi-storey parking tower.

Flexibility through modularity

The modular interface: Module Connect
Browser view with igus Module Connect adapter inquiry on a laptop.

Request: Module Connect adapter

Enquire about the Module Connect adapter now
Let us know your requirements and we will develop your customised interface with the right adapter depending on the chain series, width and number of Module Connect connectors.

Request adapter here
Connector with coloured cables.

Module Connect

ONE interface for plugging in the energy supply
Module Connect can be adapted to the filling and geometry of your e-chain® and thus enables cabling that is optimised in terms of function and design for every application.

Go to Module Connect
Cable carrier with several integrated cables and connectors.

readychain complete system

Do you need a complete cable carrier system? 
From the procurement of all the necessary components to the assembly of the ready-to-install system, we take care of the entire procurement logistics. Save up to 95% on assembly time!

Go to readychain overview

Consulting

I look forward to answering your questions

Hennlich, d.o.o.+386 4 532 06 15Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.


Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr