Low-cost zig-zag e-chain®

Low-cost zig-zag cable carrier for industrial applications.

Light and cost-effective

All the advantages of an e-chain® with an innovative guide concept for
travel distances of up to 10 metres. The system was developed for use
on different traverses and based on DIN EN 17206 and
17206 and DGUV principle 315-390. The current
system length is 2.16 m. Different chain widths are possible
are possible, inner widths from 075 to 150 mm are available. Customised divisions in the energy chain enable better cable routing.

Technical properties

travel: up to 10 metres, with a system length of 2.16 metres
Additional load: up to 8 kg / m
Available inner width: 75 mm / 150 mm
bend radius: 63 mm
Fastening: On 1-, 2-, 4-point traverse, with TÜV-tested clamps
Noise: low-noise lowering due to plastic chain
Chain guide: safe guidance in all directions

To the shop

Tech up

Allows for higher payload - with up to 30% weight reduction compared to the standard zig-zag

Cost down

Price reduced by up to 30% compared to standard zig-zag

Proof

Developed following DIN EN 17206 and DGUV Principle 315-390

Sustainability

Material and component-optimised design

Tablet shows augmented reality with large AR letters on a desk.

With our new, free augmented reality service, you can test the low-cost zig-zag e-chain® immediately. Access the service with your PC and scan the QR code with your smart device for the AR model or click on the link directly with your smart device.

Test the augmented-reality service here