System autoglide - Special solutions for long travel distances without guide trough

Long travel distances always place very special demands on an energy chain system. From a certain point, the upper run needs to be able to slide on the lower run or on the glide bar. The energy chain system also requires guidance to prevent lateral misalignment. In most cases, this is ensured by a guide trough. However, there are also applications in which a guide trough is not desirable, either for optical reasons or due to spatial constraints. The autoglide system was developed in 1995 to fill this gap. autoglide These are self-guiding energy chains that do not require a guide trough and can travel up to 80 metres. You save on procurement and installation costs and can keep lanes in the hall free for forklifts or industrial trucks, for example.

Advantages autoglide:

• Self-guiding energy chain systems, no guide trough necessary
• Safe, quiet, abrasion-resistant and energy-efficient
• For travel distances of up to 80 m
• Travelling speeds of up to 4 m/s
• Cost-effective solution due to elimination of guide troughs
• Very fast installation times for long travel distances as there is no need for guide troughs!
• Narrow width, quiet running

steel cable floor guide

• Energy, data, air and fluids in ONE system
• 88 % shorter installation time compared to a conventional
• 80 m travel
• Quiet running: 63 dB(A) at 2 m/s

For the E4.1 series

• Simple guide elements for quick installation on the substrate
• For travel distances over 10 m
• Floor guides can be driven over