My contact person
Hennlich, d.o.o.

Ulica Mirka Vadnova 13

4000 Kranj

+386 4 532 06 15
+386 4 5320620
igus® d.o.o.

Tržaška c. 134

1000 Ljubljana

+386 (0)30 601 610

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Products

Filter

Size
Electrical information
Fitting
System
Design

Number of products: 35

drylin® E stepper motor with connector, encoder and brake, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 572.91 USD/Pc.

 
Delivery time on request
To the product page
drylin® E special stepper motor with connector and splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70Nm
  • Nominal current: 3.00A
  • Motor connection: Metric connector

from 237.09 USD/Pc.

 
Delivery time on request
To the product page
drylin® E special stepping motor with connector, encoder and splash guard, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 
  • Holding torque: 1.70 Nm
  • Nominal current: 3.00 A
  • Motor connection: Metric connector

from 360.38 USD/Pc.

 
Delivery time on request
To the product page
drylin® E special stepper motor with strands, vacuum, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP00 (vacuum)
  • Holding torque: 0.70Nm
  • Nominal current: 2.50A
  • Motor connection: Stranded wire

from 938.60 USD/Pc.

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP40
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: strands and encoder, JST connector

from 251.14 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: metric connector

from 115.19 USD/Pc.

To the product page
drylin® E stepper motor with stranded wire, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 0.5Nm
  • Nominal current: 1.80A
  • Motor connection:  stranded wires

from 44.35 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

from 219.69 USD/Pc.

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: strands and encoder, JST connector

from 181.05 USD/Pc.

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands and encoder, JST connector

Upon request

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands with JST connector

Upon request

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strands and encoder, JST connector

Upon request

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strand with JST connector

Upon request

 
Delivery time on request
To the product page
drylin® E stepper motor with connector and encoder, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 341.01 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, encoder and brake, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 613.50 USD/Pc.

 
Delivery time on request
To the product page